http://www.bhsu.edu RSS feeds for Black Hills State University 60 http://www.bhsu.edu/FacultyStaff/MarketingandCommunications/TrainingVideos/tabid/4277/articleType/ArticleView/articleId/3224/How-to-Insert-and-Edit-a-Table.aspx#Comments 0 http://www.bhsu.edu/DesktopModules/DnnForge%20-%20NewsArticles/RssComments.aspx?TabID=4277&ModuleID=19909&ArticleID=3224 http://www.bhsu.edu/DesktopModules/DnnForge%20-%20NewsArticles/Tracking/Trackback.aspx?ArticleID=3224&PortalID=0&TabID=4277 http://www.bhsu.edu/FacultyStaff/MarketingandCommunications/TrainingVideos/tabid/4277/articleType/ArticleView/articleId/3224/How-to-Insert-and-Edit-a-Table.aspx How to insert and edit a table. This article will explain how to insert and edit a table. These instructions are for administrative, page and module editors though page and module editors may see some differences when they are logged in. If you are having difficulties logging in or need username and password information, please contact WebTraining@bhsu.edu for assistance. Below you will find the written instructions, a printable file for your convenience and you can watch a short video as well. Note: Tables should be used for DATA, not photos. Start on the page where you want your table to be and in the HTML module you want the table to be in. Click Edit Content In the Rich Text Editor, click Insert/Edit Table.   In the Table Properties window, set the properties of the table. Some of the properties are explained below. Rows: Horizontal spaces Columns: Vertical spaces Headers: This allows you to set a header in your table – it can be the first row, first column, or both. This is useful when displaying large amounts of data. Border size: The default for this is 1 but it should be manually set to 0. Otherwise the tables get an unappealing, old fashioned feel to them – so, unless that was your intent, you should set the Border size to 0. Alignment: This is where you want your table to be positioned on the page - Left, Center, or Right. Width: The default width is set to 200 pixels. This measurement can be in pixels or percent. Height: This property can be set manually or it will adjust with the amount of information that is added to the table. Cell spacing: Cell spacing puts some space between the cells and the border of the table. Cell padding: Cell padding puts some space between the border of the cell and the text. Caption: The caption is the title of the table – it is centered on top of the outside of the table. This is useful when more than one table on a page displays different information. Note: It is important to realize that tables can look different in different browsers.   When you have all of your settings the way you want them, click OK. If you want to adjust a table’s settings after you have already made a table, just right-click on the table and click Table Properties. This will bring back up the Table Properties box. Adjust your settings and click OK. NOTE: You can also add or delete rows, columns, or single cells by right-clicking on the table. Under Cell, Row, or Column there are settings to insert or delete cells, rows, or columns.   To change the color of a cell, right-click on the table and select Cell > Cell Properties.     In the Cell Properties window you can change many aspects of a cell. Mainly, this is for changing the color of a cell.   If you know the hexadecimal code for the color you need, you can type it in or click on Select… This brings up the Select Color window. Here, you can either click on the color you want or you can type in the hexadecimal code. Click OK on the Select Color box and click OK on the Cell Properties box to change the color of a cell. Do you want to print out the instructions? Download a printable version of How to insert and edit a table.   If you have questions about this or any other posting, please feel free to contact us. Mon, 08 Nov 2010 22:53:00 GMT f1397696-738c-4295-afcd-943feb885714:3224 http://www.bhsu.edu/FacultyStaff/MarketingandCommunications/TrainingVideos/tabid/4277/articleType/ArticleView/articleId/3219/How-to-Add-a-Module.aspx#Comments 0 http://www.bhsu.edu/DesktopModules/DnnForge%20-%20NewsArticles/RssComments.aspx?TabID=4277&ModuleID=19909&ArticleID=3219 http://www.bhsu.edu/DesktopModules/DnnForge%20-%20NewsArticles/Tracking/Trackback.aspx?ArticleID=3219&PortalID=0&TabID=4277 http://www.bhsu.edu/FacultyStaff/MarketingandCommunications/TrainingVideos/tabid/4277/articleType/ArticleView/articleId/3219/How-to-Add-a-Module.aspx In this article, we will be discussing how to add a module to a page. Modules are the basis of any page and the first place to being when editing. This example demonstrates how to add an HTML Module. If you are having difficulties or need any further clarification, please contact WebTraining@bhsu.edu for assistance. Below you will find the written instructions, a printable file for your convenience and you can watch a short video as well. 1. In Module area of the control panel, make sure Add New Module radio is selected. 2. In the Module: field, select a module from the dropdown list (frequently it will be the HTML module). 3. Select where to insert the module. Under the Pane: field choose an option. NOTE: Your options are: Content Pane, Right Pane, Left Pane, Lower Left Pane, and Lower Content Pane. If you are uncertain about where each pane is located, choose the Layout radio button in the Mode: field located in the upper left corner. 4. Select where to place the module in relation to other modules in that pane. Under the Insert: field select either: Top, Above, Below, Bottom.  5. Under the Visibility: field, select whether you would like this module to be visible to everyone with Same As Page, or to Page Editors Only.   NOTE: You would want to make a module visible to page editors only if the module will be a work in progress for a few days. This way no one will be able to see the module unless logged into the website. You will be able to change the visibility for everyone to see after the module is completed via module settings. 6. Click Add Module To Page.    Do you want to print out the instructions? Download the printable version of How to add a Module. Oops! Looks like you don't have Javascript enabled, or don't have Flash Player installed. var so = new SWFObject('http://www.BHSU.edu/Portals/0/test/jw/player.swf','ply','600','480','9','#'); so.addParam('allowfullscreen','true'); so.addParam('allowscriptaccess','always'); so.addParam('wmode','opaque'); so.addVariable('image','/Portals/0/training/dnnHelp/videoCover/howToAddModule.jpg'); so.addVariable('skin','http://www.BHSU.edu/Portals/0/test/jw/stijl.swf'); so.addVariable('streamer','rtmp://media.bhsu.edu/vod/media/marketingComm/training/HowToAddModule'); so.addVariable('file','/marketingComm/training/Howtoaddamodule1.mp4'); so.addVariable('type','rtmp'); so.addVariable('frontcolor','888888'); so.addVariable('lightcolor','999999'); so.addVariable('controlbar','over'); so.addVariable('stretching','fill'); so.write('mediaspace'); Mon, 08 Nov 2010 22:03:00 GMT f1397696-738c-4295-afcd-943feb885714:3219 http://www.bhsu.edu/FacultyStaff/MarketingandCommunications/TrainingVideos/tabid/4277/articleType/ArticleView/articleId/2768/How-to-Insert-an-Image.aspx#Comments 0 http://www.bhsu.edu/DesktopModules/DnnForge%20-%20NewsArticles/RssComments.aspx?TabID=4277&ModuleID=19909&ArticleID=2768 http://www.bhsu.edu/DesktopModules/DnnForge%20-%20NewsArticles/Tracking/Trackback.aspx?ArticleID=2768&PortalID=0&TabID=4277 http://www.bhsu.edu/FacultyStaff/MarketingandCommunications/TrainingVideos/tabid/4277/articleType/ArticleView/articleId/2768/How-to-Insert-an-Image.aspx This tutorial will discuss how to insert an image. If you are having difficulties or need any further clarification, please contact WebTraining@bhsu.edu for assistance. Below you will find the written instructions, a printable file for your convenience and you can watch a short video as well.  First confirm that you are logged in, on the the page that you will be placing your photo, and in the Edit Content mode of the module you wish to have the picture inserted in. Click your cursor in the content area where you want the picture to be placed.   Click on the Insert Picture icon (looks like a landscape with a sun).   On the Image Properties window click Browse Server.   On the Image Gallery window, navigate through your folders to the location of the picture you wish to insert. NOTE: If you go into the wrong folder, you can return to the previous folder by clicking Go Up folder.   If the picture is not yet uploaded to the server (i.e. it is still on your computer), navigate to the folder where you wish this picture to be stored. Make sure the picture you are going to insert is web quality.   After you have selected the picture, you will automatically be taken back to the Image Properties window. You can see your picture in the preview box. Type in the Alternative Text. This is the text that will show up if someone hovers over the image, and it is the text that a screen-reader or search engine will see. Alternative text can include a brief description of the photo, a summary of the text contained in the graphic, or a summary of the photo in context to the text that surrounds it. In the Align field, select Left or Right. This brings the text around the photo and aligns the photo either left or right depending on your preference. To hyperlink a picture to another web page, click the Link tab and insert the hyperlink in the URL field. (For more information on this step, see the Hyperlinking an Image Tutorial) Click OK. You will see the picture inserted into the module. Do you want to print out the instructions? Download the printable version of How to Insert a Picture.   Oops! Looks like you don't have Javascript enabled, or don't have Flash Player installed. var so = new SWFObject('http://www.BHSU.edu/Portals/0/test/jw/player.swf','ply','600','480','9','#'); so.addParam('allowfullscreen','true'); so.addParam('allowscriptaccess','always'); so.addParam('wmode','opaque'); so.addVariable('image','/Portals/0/training/dnnHelp/videoCover/InsertImage.jpg'); so.addVariable('skin','http://www.BHSU.edu/Portals/0/test/jw/stijl.swf'); so.addVariable('streamer','rtmp://media.bhsu.edu/vod/media/marketingComm/training/HowtoInsertPicture'); so.addVariable('file','/marketingComm/training/HowtoInsertPicture.mp4'); so.addVariable('type','rtmp'); so.addVariable('frontcolor','888888'); so.addVariable('lightcolor','999999'); so.addVariable('controlbar','over'); so.addVariable('stretching','fill'); so.write('mediaspace');     If you have any questions about this or any other posting, please feel free to contact us. Fri, 04 Jun 2010 20:10:00 GMT f1397696-738c-4295-afcd-943feb885714:2768 http://www.bhsu.edu/FacultyStaff/MarketingandCommunications/TrainingVideos/tabid/4277/articleType/ArticleView/articleId/2767/How-to-Upload-a-File.aspx#Comments 0 http://www.bhsu.edu/DesktopModules/DnnForge%20-%20NewsArticles/RssComments.aspx?TabID=4277&ModuleID=19909&ArticleID=2767 http://www.bhsu.edu/DesktopModules/DnnForge%20-%20NewsArticles/Tracking/Trackback.aspx?ArticleID=2767&PortalID=0&TabID=4277 http://www.bhsu.edu/FacultyStaff/MarketingandCommunications/TrainingVideos/tabid/4277/articleType/ArticleView/articleId/2767/How-to-Upload-a-File.aspx This article will explain the two main ways you can upload a file. To begin these instructions, you must be logged into the website and in the content editor of a module. If you are having difficulties or need any further clarification, please contact WebTraining@bhsu.edu for assistance. Below you will find the written instructions, a printable file for your convenience and you can watch a short video as well. Enter your test into the Content Editor, and select the portion of text you want to be a link. Click Insert/Edit Link. In the Link window, click Browse Server.     In the FCKeditor Link Gallery window, select File (A File On Your Site).     Click Upload New File link.     In the File Name: field, click Browse....     On the Choose file window, select the file you wish to upload, and click Open.     On the FCKeditor Link Gallery window, click Upload Selected File.     Click Use selected link.     In the Link window, click OK. How to upload a file via Insert/Edit Image Click Insert/Edit Image.     In the Image Properties window, click Browse Server.   In the Image Gallery window, click Browse....   In the Choose file window, select the file you wish to upload, and click Open.   Click Upload New File. Do you want to print out the instructions? Download the printable version of How to Upload a File. Oops! Looks like you don't have Javascript enabled, or don't have Flash Player installed. var so = new SWFObject('http://www.BHSU.edu/Portals/0/test/jw/player.swf','ply','600','480','9','#'); so.addParam('allowfullscreen','true'); so.addParam('allowscriptaccess','always'); so.addParam('wmode','opaque'); so.addVariable('image','/Portals/0/training/dnnHelp/videoCover/howToUploadFile.jpg'); so.addVariable('skin','http://www.BHSU.edu/Portals/0/test/jw/stijl.swf'); so.addVariable('streamer','rtmp://media.bhsu.edu/vod/media/marketingComm/training/HowtoUploadaFile'); so.addVariable('file','/marketingComm/training/HowtoUploadaFile.mp4'); so.addVariable('type','rtmp'); so.addVariable('frontcolor','888888'); so.addVariable('lightcolor','999999'); so.addVariable('controlbar','over'); so.addVariable('stretching','fill'); so.write('mediaspace');   If you have any questions about this or any other posting, please feel free to contact us. Fri, 04 Jun 2010 20:01:00 GMT f1397696-738c-4295-afcd-943feb885714:2767 http://www.bhsu.edu/FacultyStaff/MarketingandCommunications/TrainingVideos/tabid/4277/articleType/ArticleView/articleId/2766/How-to-Add-an-Existing-Module.aspx#Comments 0 http://www.bhsu.edu/DesktopModules/DnnForge%20-%20NewsArticles/RssComments.aspx?TabID=4277&ModuleID=19909&ArticleID=2766 http://www.bhsu.edu/DesktopModules/DnnForge%20-%20NewsArticles/Tracking/Trackback.aspx?ArticleID=2766&PortalID=0&TabID=4277 http://www.bhsu.edu/FacultyStaff/MarketingandCommunications/TrainingVideos/tabid/4277/articleType/ArticleView/articleId/2766/How-to-Add-an-Existing-Module.aspx This article will explain how to add an existing module. These instructions are for administrative and page editors. If you are having difficulties or need any further clarification, please contact WebTraining@bhsu.edu for assistance. Below you will find the written instructions, a printable file for your convenience and you can watch a short video as well. Adding an Existing Module can save you time both in the present and future. Use the Add Existing Module option, when there is content you would like on multiple pages, but would only like to change it once. Using this process of adding an existing module, you can change one module and the changes will be reflected in all of the modules. Let’s learn how to add an existing module. Navigate to the page where you would like to add the module. NOTE: For this demonstration, I am going to add an existing module to my STF Projects page and its title will be Banner. It is best to have all your module settings established prior to adding an existing module as those changes will not be reflected on the additional modules. Confirm you are in edit mode. In the Add Module area, select the Add Existing Module radio button. NOTE: After selecting this option, you will see that your options will change from Module and Title as the first two options in the left column, to Page and Module. In the Page: field, select the page from which you want to add the module. In the Module: field, select the module you would like to add. NOTE: It is important that the module you want to add has a title you will be able to recognize and easily identify. If you did not give the module a title, there will be a blank spot or it will have a default title in the drop down menu making it difficult to know what to select. In the Pane: field, select which pane you would like the module to be placed. NOTE: You can add an existing module anywhere on a new page, it doesn’t have to be in the same place. For this example, I want to put my banner in the same location, in the top pane. Click Add Module to Page to add the existing module. You will then see the module on your page where you added it.   Do you want to print out the instructions? Download the printable version of How to Add an Existing Module.   Oops! Looks like you don't have Javascript enabled, or don't have Flash Player installed. var so = new SWFObject('http://www.BHSU.edu/Portals/0/test/jw/player.swf','ply','600','480','9','#'); so.addParam('allowfullscreen','true'); so.addParam('allowscriptaccess','always'); so.addParam('wmode','opaque'); so.addVariable('image','/Portals/0/training/dnnHelp/videoCover/AddExistingModule.jpg'); so.addVariable('skin','http://www.BHSU.edu/Portals/0/test/jw/stijl.swf'); so.addVariable('streamer','rtmp://media.bhsu.edu/vod/media/marketingComm/training/AddingExistingModule'); so.addVariable('file','/marketingComm/training/AddingExistingModule.mp4'); so.addVariable('type','rtmp'); so.addVariable('frontcolor','888888'); so.addVariable('lightcolor','999999'); so.addVariable('controlbar','over'); so.addVariable('stretching','fill'); so.write('mediaspace');   If you have any questions about this or any other posting, please feel free to contact us. Fri, 04 Jun 2010 19:59:00 GMT f1397696-738c-4295-afcd-943feb885714:2766 http://www.bhsu.edu/FacultyStaff/MarketingandCommunications/TrainingVideos/tabid/4277/articleType/ArticleView/articleId/2765/How-to-Hyperlink-an-Image.aspx#Comments 0 http://www.bhsu.edu/DesktopModules/DnnForge%20-%20NewsArticles/RssComments.aspx?TabID=4277&ModuleID=19909&ArticleID=2765 http://www.bhsu.edu/DesktopModules/DnnForge%20-%20NewsArticles/Tracking/Trackback.aspx?ArticleID=2765&PortalID=0&TabID=4277 http://www.bhsu.edu/FacultyStaff/MarketingandCommunications/TrainingVideos/tabid/4277/articleType/ArticleView/articleId/2765/How-to-Hyperlink-an-Image.aspx In this article, we will be talking about how to hyperlink an image. If you are having difficulties or need any further clarification, please contact WebTraining@bhsu.edu for assistance. Below you will find the written instructions, a printable file for your convenience and you can watch a short video as well. Linking images can be very helpful for your audience. This can help them navigate through your webpage and make it much more user-friendly. To start the process, make sure you are logged in. First, navigate to the module that contains the image you wish to hyperlink and click on, Edit Content. NOTE: Check out the Inserting a Picture Tutorial if you need more information on inserting a picture.   The edit content page will come up and the next step is to either (a.) Right click on the image you wish to hyperlink and select Image Properties          or (b.) Select the image and then click the Insert/Edit Image icon in the navigation bar.   This will bring up the Image Properties window. Click on the Link tab. Select the URL radio button, then in the URL: field, you may type in or paste in a web address. NOTE: Additional options include linking to a file, or to a page on your site. For example, I linked this image to my Art Gallery. To do this, select the radio button Page ( A Page on Your Site ). Then in URL: dropdown menu, select the desired page.   Click Use selected link in the bottom left corner of the Link Gallery window. On the Image Properties window, a blue border around the picture in your preview window will appear. This is a quick way to know that you have successfully hyperlinked the image. This blue border will not appear on the actual page. Important Things to Remember: Enter Alternative Text if it is not already there. This is important for screen readers and search engines and will show up when a user hovers over the image. When you have hyperlinked an image, this can be especially important to let them know it is hyperlinked. For example, I am going to enter “Click here to see my Art Gallery”. Under the Link tab, there is a dropdown menu labeled Target. It is important to select New Window when you are sending a user somewhere other than your website you are currently on. For example, if I wanted to send a user to www.cnn.com, I would want to use New Window so they can see the link in a window that pops up and continue to follow along on my webpage. Click OK on the Image Properties window. Click Save. Do you want to print out the instructions? Download the printable version of How to Hyperlink an Image.   Oops! Looks like you don't have Javascript enabled, or don't have Flash Player installed. var so = new SWFObject('http://www.BHSU.edu/Portals/0/test/jw/player.swf','ply','600','480','9','#'); so.addParam('allowfullscreen','true'); so.addParam('allowscriptaccess','always'); so.addParam('wmode','opaque'); so.addVariable('image','/Portals/0/training/dnnHelp/videoCover/HyperlinkingImage.jpg'); so.addVariable('skin','http://www.BHSU.edu/Portals/0/test/jw/stijl.swf'); so.addVariable('streamer','rtmp://media.bhsu.edu/vod/media/marketingComm/training/HyperlinkingImage'); so.addVariable('file','/marketingComm/training/HyperlinkingImage.mp4'); so.addVariable('type','rtmp'); so.addVariable('frontcolor','888888'); so.addVariable('lightcolor','999999'); so.addVariable('controlbar','over'); so.addVariable('stretching','fill'); so.write('mediaspace');   If you have any questions about this or any other posting, please feel free to contact us. Fri, 04 Jun 2010 18:49:00 GMT f1397696-738c-4295-afcd-943feb885714:2765 http://www.bhsu.edu/FacultyStaff/MarketingandCommunications/TrainingVideos/tabid/4277/articleType/ArticleView/articleId/2764/How-to-Edit-a-Title-in-a-Module.aspx#Comments 0 http://www.bhsu.edu/DesktopModules/DnnForge%20-%20NewsArticles/RssComments.aspx?TabID=4277&ModuleID=19909&ArticleID=2764 http://www.bhsu.edu/DesktopModules/DnnForge%20-%20NewsArticles/Tracking/Trackback.aspx?ArticleID=2764&PortalID=0&TabID=4277 http://www.bhsu.edu/FacultyStaff/MarketingandCommunications/TrainingVideos/tabid/4277/articleType/ArticleView/articleId/2764/How-to-Edit-a-Title-in-a-Module.aspx This article will explain how to add and edit a title within a module. These instructions are for administrative, page and module editors though page and module editors may see some differences when they are logged in. If you are having difficulties logging in or need username and password information, please contact WebTraining@bhsu.edu for assistance. Below you will find the written instructions, a printable file for your convenience and you can watch a short video as well. There are two ways to insert a title into your module. Option 1: In the lower portion of the module, click Settings. You can also hover over the blue triangle and click settings.NOTE: This will take you to the Module Settings page.   Under Basic Settings, in the Module Title: field, type the desired title to your module.   After you have inserted your title, click Update at the bottom of the page.  Option 2: Hover your mouse over the existing title. Often it is titled Text/HTML.NOTE: A blue Edit box with a pencil will appear.   Click on the Edit box. NOTE: A red box will appear.   Type in your new module title within the red box.   Click the Update icon to save your new title.  Do you want to print out the instructions? Download the printable version of How to Add and Edit a Text Module.  Watch a video on how to edit module title.   Oops! Looks like you don't have Javascript enabled, or don't have Flash Player installed. var so = new SWFObject('http://www.BHSU.edu/Portals/0/test/jw/player.swf','ply','600','480','9','#'); so.addParam('allowfullscreen','true'); so.addParam('allowscriptaccess','always'); so.addParam('wmode','opaque'); so.addVariable('image','/Portals/0/training/dnnHelp/videoCover/howToEditModuleTitle.jpg'); so.addVariable('skin','http://www.BHSU.edu/Portals/0/test/jw/stijl.swf'); so.addVariable('streamer','rtmp://media.bhsu.edu/vod/media/marketingComm/training/Adding_editingTxtTitle'); so.addVariable('file','/marketingComm/training/Adding_editingTxtTitle.mp4'); so.addVariable('type','rtmp'); so.addVariable('frontcolor','888888'); so.addVariable('lightcolor','999999'); so.addVariable('controlbar','over'); so.addVariable('stretching','fill'); so.write('mediaspace');   If you have any questions about this or any other posting, please feel free to contact us. Fri, 04 Jun 2010 18:47:00 GMT f1397696-738c-4295-afcd-943feb885714:2764 http://www.bhsu.edu/FacultyStaff/MarketingandCommunications/TrainingVideos/tabid/4277/articleType/ArticleView/articleId/2762/How-to-Delete-and-Recover-a-Module.aspx#Comments 0 http://www.bhsu.edu/DesktopModules/DnnForge%20-%20NewsArticles/RssComments.aspx?TabID=4277&ModuleID=19909&ArticleID=2762 http://www.bhsu.edu/DesktopModules/DnnForge%20-%20NewsArticles/Tracking/Trackback.aspx?ArticleID=2762&PortalID=0&TabID=4277 http://www.bhsu.edu/FacultyStaff/MarketingandCommunications/TrainingVideos/tabid/4277/articleType/ArticleView/articleId/2762/How-to-Delete-and-Recover-a-Module.aspx  How to delete and recover a deleted module. 1. Hover the mouse over the Module Actions Menu, and scroll down to the Delete menu item and left click. 2. Click OK to confirm Delete of the Module. NOTE: The Recycle Bin is where Modules (and Pages) go when you Delete them. They can be recovered from the recycle bin until you empty it. Recovering a deleted module is very similar to recovering a deleted page. 3. To recover the deleted module, scroll over Admin menu and select Recycle Bin menu item. 4. Select the Module you would like to restore.The list contains all the modules that you have deleted since the last time you emptied the Recycle Bin. 5. Click Restore button. Your Module will be removed from the Recycle Bin list of modules and placed on its original Page. Do you want to print out the instructions? Download the printable version of How to Delete and Recover a module. Watch the video below on how to delete and recover a module. Oops! Looks like you don't have Javascript enabled, or don't have Flash Player installed. var so = new SWFObject('http://www.BHSU.edu/Portals/0/test/jw/player.swf','ply','600','480','9','#'); so.addParam('allowfullscreen','true'); so.addParam('allowscriptaccess','always'); so.addParam('wmode','opaque'); so.addVariable('image','/Portals/0/training/dnnHelp/videoCover/HowToDeleteAndRecoverAModule.jpg'); so.addVariable('skin','http://www.BHSU.edu/Portals/0/test/jw/stijl.swf'); so.addVariable('streamer','rtmp://media.bhsu.edu/vod/media/marketingComm/training/HowToDeleteAndRecoverAModule'); so.addVariable('file','/marketingComm/training/HowToDeleteAndRecoverAModule.mp4'); so.addVariable('type','rtmp'); so.addVariable('frontcolor','888888'); so.addVariable('lightcolor','999999'); so.addVariable('controlbar','over'); so.addVariable('stretching','fill'); so.write('mediaspace'); Fri, 04 Jun 2010 18:42:00 GMT f1397696-738c-4295-afcd-943feb885714:2762 http://www.bhsu.edu/FacultyStaff/MarketingandCommunications/TrainingVideos/tabid/4277/articleType/ArticleView/articleId/2761/How-to-Hyperlink-to-a-Webpage.aspx#Comments 0 http://www.bhsu.edu/DesktopModules/DnnForge%20-%20NewsArticles/RssComments.aspx?TabID=4277&ModuleID=19909&ArticleID=2761 http://www.bhsu.edu/DesktopModules/DnnForge%20-%20NewsArticles/Tracking/Trackback.aspx?ArticleID=2761&PortalID=0&TabID=4277 http://www.bhsu.edu/FacultyStaff/MarketingandCommunications/TrainingVideos/tabid/4277/articleType/ArticleView/articleId/2761/How-to-Hyperlink-to-a-Webpage.aspx This article will explain how to create a hyperlink. These instructions are for all editors. If you are having difficulties or need any further clarification, please contact WebTraining@bhsu.edu for assistance. Below you will find the written instructions, a printable file for your convenience and you can watch a short video as well. To Link to a Webpage Insert the desired content in the Rich Text Editor. Highlight the word(s) that you want to be hyperlinked. Select the Hyperlink button in the Text Editor Toolbar.   On the Link window, in URL field, type or paste the desired URL. Click OK.   The link will now be able to take you to the desired webpage. To link to a webpage (shortcut). Type the URL address directly into the Rich Text Editor, and it will automatically hyperlink it upon pressing either the space or enter key on the keyboard. Do you want to print out the instructions? Download the printable version of How to Add a Hyperlink. Watch the video below on how to a edit module title. Oops! Looks like you don't have Javascript enabled, or don't have Flash Player installed. var so = new SWFObject('http://www.BHSU.edu/Portals/0/test/jw/player.swf','ply','600','480','9','#'); so.addParam('allowfullscreen','true'); so.addParam('allowscriptaccess','always'); so.addParam('wmode','opaque'); so.addVariable('image','/Portals/0/training/dnnHelp/videoCover/howToHyperlinkWeb.jpg'); so.addVariable('skin','http://www.BHSU.edu/Portals/0/test/jw/stijl.swf'); so.addVariable('streamer','rtmp://media.bhsu.edu/vod/media/marketingComm/training/Hyperlink_Webpage'); so.addVariable('file','/marketingComm/training/Hyperlink_Webpage.mp4'); so.addVariable('type','rtmp'); so.addVariable('frontcolor','888888'); so.addVariable('lightcolor','999999'); so.addVariable('controlbar','over'); so.addVariable('stretching','fill'); so.write('mediaspace'); Fri, 04 Jun 2010 18:40:00 GMT f1397696-738c-4295-afcd-943feb885714:2761